A glass slide randomly picked up in the laboratory.
Report | |
Created on: | 2019-06-23 23:55:49 |
Operator: | Phil Wu |
File | |
File name: | C:\Users\Phil Wu\Documents\Data and Analysis\XRD\XPert\2019June13_Measurement_Hualien Rock Samples\absolute scan_sample3.xrdml |
Checksum: | 011BFB042372D891AE0C1FB52D641874 |
File size (bytes): | 13275 |
Time stamp | |
Started: | 2019-06-14 02:56:26 |
Finished: | 2019-06-14 03:06:50 |
Total time (h:m:s): | 00:10:24 |
Comment | |
Configuration=PW3071/xx Bracket, Owner=User-1, Creation date=2014/5/21 ?? 09:08:56 Goniometer=PW3050/60 (Theta/Theta); Minimum step size 2Theta:0.001; Minimum step size Omega:0.001 Sample stage=PW3071/xx Bracket Diffractometer system=XPERT-3 Measurement program=C:\PANalytical\Data Collector\Programs\absolute scan.xrdmp, Identifier={128158DF-6E82-44E4-AF97-6F8E23A28BE0} | |
Status | |
Completed | |
Sample | |
Sample type: | To be analyzed |
Measurement type | |
Single scan | |
Used wavelength | |
Intended wavelength type: | Kα1 |
Kα1 (Å): | 1.540598 |
Kα2 (Å): | 1.544426 |
Kα2/Kα1 intensity ratio: | 0.50 |
Kα (Å): | 1.541874 |
Kβ (Å): | 1.392250 |
Incident beam path | |
Radius (mm): | 240.0 |
X-ray tube | |
Name: | Empyrean Cu LFF HR (9430 033 7310x) DK402428 |
Anode material: | Cu |
Voltage (kV): | 45 |
Current (mA): | 40 |
Focus | |
Focus type: | Line |
Length (mm): | 12.0 |
width (mm): | 0.4 |
Take-off angle (°): | 6.0 |
Filter | |
Name: | Beta-filter Nickel |
Material: | Ni |
Thickness (mm): | 0.020 |
Soller slit | |
Name: | Soller slits 0.04 rad. |
Opening (rad.): | 0.04 |
Mask | |
Name: | Fixed incident beam mask 10 mm |
Width (mm): | 6.60 |
Anti-scatter slit | |
Name: | Fixed slit 1/2° |
Type: | Fixed |
Height (mm): | 0.76 |
Divergence slit | |
Name: | Fixed slit 1/4° |
Distance to sample (mm): | 140 |
Type: | Fixed |
Height (mm): | 0.38 |
Angle (°): | 0.2177 |
Diffracted beam path | |
Radius (mm): | 240.0 |
Anti-scatter slit | |
Name: | Fixed slit 1/4° |
Type: | Fixed |
Height (mm): | 0.38 |
Soller slit | |
Name: | Soller slits 0.04 rad. |
Opening (rad.): | 0.04 |
Detector | |
Name: | X’Celerator detector |
Type: | RTMS detector |
PHD – Lower level (%): | 37.5 |
PHD – Upper level (%): | 79.5 |
Mode: | Scanning |
Active length (°): | 2.122 |
Source | |
Created by: | IOP |
Application SW: | Data Collector vs. 4.4a |
Instrument control SW: | XPERT-3 vs. 7.0/ 20131101 |
Instrument ID: | 0000000011156094 |
Sample mode | |
Reflection | |
Scan | |
Start time stamp: | 2019-06-14 02:56:26 |
End time stamp: | 2019-06-14 03:06:50 |
Scan axis: | Gonio |
Scan range (°): | 5.0000 – 89.9935 |
Start position (°): | 5.0167 |
End position (°): | 89.9768 |
Step size (°): | 0.0334 |
No. of points: | 2543 |
Scan mode: | Continuous |
Counting time (s): | 29.845 |
The measurement indicates material is amorphous = no identified x-ray peaks, in other words the glass is glassy.